Skip to content
Sagan
experiment

Run 509ad04f

auto-recoveryFollow-up of run 4b7f3f03

The previous Claude Code run failed or crashed. First diagnose why it stopped using the transcript below. Then fix or work around the problem if possible and continue the original request to a final useful result. Do not repeat completed work. If the root cause is external credentials, unavailable infrastructure, missing human approval, or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action.

Original request
pod-provisioner dispatch for experiment #363 (retry-4) — orchestrator run f86281ce-da03-4f60-871a-a8723393c758
Failure or crash reason
Pod 87xq2h88dmg5j5 not found in account=team
Previous run transcript
- 2026-05-14T09:31:06.751Z pod_provisioner_attempt: gpu=A100x1 cloud=SECURE account=team
- 2026-05-14T09:31:08.016Z deploy_pod_started: 87xq2h88dmg5j5
- 2026-05-14T09:31:20.962Z deploy_completed: pod-provisioner committed 1 pod(s)
- 2026-05-14T09:32:07.564Z runpod_status: RUNNING
- 2026-05-14T09:33:07.299Z runpod_retry: Pod 87xq2h88dmg5j5 not found in account=team
- 2026-05-14T09:34:07.336Z runpod_retry: Pod 87xq2h88dmg5j5 not found in account=team
Statuscompleted4 events · latest 1326h 17m ago

Resume history

This run resumes 4b7f3f03.

Plan

Blocker — sixth consecutive same-mode failure; R5 escalation rule must be honored

This is the **sixth** dispatch attempt for experiment #363, and the **fourth in a row** to exhibit the identical failure mode: pod reports `RUNNING` on the team account, then disappears from the account-scoped pod list shortly after. ### Cumulative failure ledger - retry-1: `SUPPLY_CONSTRAINT` - retry-2: `INTERNAL_SERVER_ERROR` on `podFindAndDeployOnDemand` - retry-3: `Pod not found in account=team` after ~14 min RUNNING - retry-4: `Pod not found in account=team` after ~2 min RUNNING - retry-5: `Pod not found in account=team` after ~7 min RUNNING - **retry-6 (this run, `m1ayhl6nsbxw04`): `Pod not found in account=team` after ~1 min RUNNING** Four consecutive post-`RUNNING` disappearances against the team account is conclusively not transient capacity flake. It is consistent with a RunPod-side or team-account-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache). ### Why I am refusing to auto-recover The approved plan for #363 contains a pre-registered escalation rule (**R5** in the existing `planJson` section "Blocker — escalate per plan's pre-registered R5 rule"): > if retry-4 also disappears after `RUNNING`, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it. That trigger condition was met two retries ago. The previous Claude Code run filed this same blocker after retry-5 and was overridden. retry-6 reproduced the exact same failure, providing yet another data point that auto-recovery cannot resolve this. Continuing the loop would (a) violate the operator's now thrice-confirmed pre-registered escalation rule, (b) waste another dispatch cycle on a failure mode that has now reproduced four times in a row on the same account, and (c) overstep the planner role — the planner is forbidden from launching pods, and the plan is already approved and unchanged. The planner-role instructions also explicitly say: *"If the root cause is … unavailable infrastructure … or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action."* This is unavailable infrastructure. ### Exact next manual action The operator must pick one of the following before any further auto-recovery is permitted. A and C can run in parallel; B is the cheapest single diagnostic. **A — Manual-SSH-monitored dispatch (plan's preferred next step).** Dispatch manually (`pnpm runpod:dispatch` on the runner VM using the existing spec from #363's `planJson`, or via the RunPod dashboard). Within 60 s of `RUNNING`, SSH into the pod and tail the bootstrap log. If the pod disappears from the team account while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan polling lost the pod" — these have very different fixes. **B — Account fallback test.** The plan's `substitution_policy.account` already allows `personal`. Edit the policy's `prefer` from `team` to `personal` and re-run pod-provisioner. If the pod survives on personal but not on team, the issue is team-account-specific (billing, rate limit, per-team RunPod state) and the next step is a support ticket against that account. If it disappears on personal too, the issue is broader. **C — File a RunPod support ticket** referencing the six pod IDs across the six attempts (most recent: `m1ayhl6nsbxw04`, `36xpkdt2tumzxb`, `87xq2h88dmg5j5`), asking why these pods reported `RUNNING` and then vanished from the account-scoped pod list within 1–14 minutes. Worth filing in parallel with A or B regardless. ### What I am not changing - **The experiment plan itself is unchanged.** Design, hypothesis, prediction, kill criteria, compute estimate, and runpod-spec in `planJson` are all still correct. This is RunPod infrastructure, not methodology — there is nothing for the planner to redraft. - **No critique loop.** The plan's existing R5 notes already cover this exact path; a fourth consecutive same-mode failure adds evidence but no new question for critics. - **No file edits. No pod dispatch. No compute spent.** ### Evidence pointer - This orchestrator run: auto-recovery for `6e8a0593-c1f6-45b3-9dd0-7a89618006df` - Disappeared pod (retry-6): `m1ayhl6nsbxw04` (team account, ~1 min RUNNING before disappearance) - Disappeared pod (retry-5): `36xpkdt2tumzxb` (team account, ~7 min RUNNING) - Disappeared pod (retry-4): `87xq2h88dmg5j5` (team account, ~2 min RUNNING) - Prior orchestrator runs that filed the same blocker: `f86281ce-da03-4f60-871a-a8723393c758` (after retry-4), and the planner run that immediately preceded retry-6 (after retry-5) **The operator must advance this experiment manually per the plan's R5 escalation rule before any further auto-recovery is allowed.** Four consecutive same-mode failures after the rule was first invoked is overwhelming evidence that auto-recovery cannot resolve this.

Blocker — sixth consecutive same-mode failure; R5 escalation rule must be honored

This is the sixth dispatch attempt for experiment #363, and the fourth in a row to exhibit the identical failure mode: pod reports RUNNING on the team account, then disappears from the account-scoped pod list shortly after.

Cumulative failure ledger

  • retry-1: SUPPLY_CONSTRAINT
  • retry-2: INTERNAL_SERVER_ERROR on podFindAndDeployOnDemand
  • retry-3: Pod not found in account=team after ~14 min RUNNING
  • retry-4: Pod not found in account=team after ~2 min RUNNING
  • retry-5: Pod not found in account=team after ~7 min RUNNING
  • retry-6 (this run, m1ayhl6nsbxw04): Pod not found in account=team after ~1 min RUNNING

Four consecutive post-RUNNING disappearances against the team account is conclusively not transient capacity flake. It is consistent with a RunPod-side or team-account-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache).

Why I am refusing to auto-recover

The approved plan for #363 contains a pre-registered escalation rule (R5 in the existing planJson section "Blocker — escalate per plan's pre-registered R5 rule"):

if retry-4 also disappears after RUNNING, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it.

That trigger condition was met two retries ago. The previous Claude Code run filed this same blocker after retry-5 and was overridden. retry-6 reproduced the exact same failure, providing yet another data point that auto-recovery cannot resolve this.

Continuing the loop would (a) violate the operator's now thrice-confirmed pre-registered escalation rule, (b) waste another dispatch cycle on a failure mode that has now reproduced four times in a row on the same account, and (c) overstep the planner role — the planner is forbidden from launching pods, and the plan is already approved and unchanged.

The planner-role instructions also explicitly say: "If the root cause is … unavailable infrastructure … or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action." This is unavailable infrastructure.

Exact next manual action

The operator must pick one of the following before any further auto-recovery is permitted. A and C can run in parallel; B is the cheapest single diagnostic.

A — Manual-SSH-monitored dispatch (plan's preferred next step). Dispatch manually (pnpm runpod:dispatch on the runner VM using the existing spec from #363's planJson, or via the RunPod dashboard). Within 60 s of RUNNING, SSH into the pod and tail the bootstrap log. If the pod disappears from the team account while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan polling lost the pod" — these have very different fixes.

B — Account fallback test. The plan's substitution_policy.account already allows personal. Edit the policy's prefer from team to personal and re-run pod-provisioner. If the pod survives on personal but not on team, the issue is team-account-specific (billing, rate limit, per-team RunPod state) and the next step is a support ticket against that account. If it disappears on personal too, the issue is broader.

C — File a RunPod support ticket referencing the six pod IDs across the six attempts (most recent: m1ayhl6nsbxw04, 36xpkdt2tumzxb, 87xq2h88dmg5j5), asking why these pods reported RUNNING and then vanished from the account-scoped pod list within 1–14 minutes. Worth filing in parallel with A or B regardless.

What I am not changing

  • The experiment plan itself is unchanged. Design, hypothesis, prediction, kill criteria, compute estimate, and runpod-spec in planJson are all still correct. This is RunPod infrastructure, not methodology — there is nothing for the planner to redraft.
  • No critique loop. The plan's existing R5 notes already cover this exact path; a fourth consecutive same-mode failure adds evidence but no new question for critics.
  • No file edits. No pod dispatch. No compute spent.

Evidence pointer

  • This orchestrator run: auto-recovery for 6e8a0593-c1f6-45b3-9dd0-7a89618006df
  • Disappeared pod (retry-6): m1ayhl6nsbxw04 (team account, ~1 min RUNNING before disappearance)
  • Disappeared pod (retry-5): 36xpkdt2tumzxb (team account, ~7 min RUNNING)
  • Disappeared pod (retry-4): 87xq2h88dmg5j5 (team account, ~2 min RUNNING)
  • Prior orchestrator runs that filed the same blocker: f86281ce-da03-4f60-871a-a8723393c758 (after retry-4), and the planner run that immediately preceded retry-6 (after retry-5)

The operator must advance this experiment manually per the plan's R5 escalation rule before any further auto-recovery is allowed. Four consecutive same-mode failures after the rule was first invoked is overwhelming evidence that auto-recovery cannot resolve this.

Events

9:35:08 AMstartedagent
kind=experiment
9:35:53 AMassistant_textagent
## Blocker — escalate per plan's own R5 rule, do not auto-recover

### Diagnosis

The prior dispatch crashed at the pod-provisioner stage, not the planning stage. Sequence:

- `09:31:08` pod `87xq2h88dmg5j5` deployed on team account, A100×1 SECURE
- `09:32:07` pod reported `RUNNING`
- `09:33:07` and `09:34:07` RunPod API returns `Pod not found in account=team` — pod silently disappeared from the team account after entering RUNNING

This is the third distinct RunPod failure mode this experiment has hit across four auto-recovery attempts:
- retry-1: `SUPPLY_CONSTRAINT`
- retry-2: `INTERNAL_SERVER_ERROR` on `podFindAndDeployOnDemand`
- retry-3: `Pod not found in account=team` after 14 min RUNNING
- retry-4 (this run): `Pod not found in account=team` after ~2 min RUNNING

### Why I am not auto-dispatching retry-5

The approved plan for #363 (already in `planJson` on the scoped record) contains an explicit escalation rule in **R5**:

> Mitigation for retry-4: … (c) if retry-4 also disappears after `RUNNING`, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it.

retry-4 just exhibited the same post-`RUNNING` disappearance. The operator pre-committed to switching out of auto-recovery at this exact failure mode. Continuing the auto-recovery loop would:

1. Violate the operator's pre-registered escalation rule.
2. Waste another ~$2–4 of dispatch overhead on a failure mode that has now happened twice in a row against the same account, suggesting a team-account-side or RunPod-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache) rather than transient capacity flake.
3. Be out of my role's scope — the planner is forbidden from launching RunPods, and the plan is already approved and unchanged.

### Exact next manual action

Choose one:

**Option A — manual-SSH-monitored dispatch (the plan's preferred next step).**
Have a human operator dispatch the pod (either via `pnpm runpod:dispatch` from the runner VM with the existing spec from #363's `planJson`, or via the RunPod dashboard directly), then SSH into the pod within 60 s of `RUNNING` and tail the bootstrap log. If the pod disappears from the team account again while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan-side polling lost the pod" — both have very different fixes.

**Option B — switch the account fallback.**
The plan's `substitution_policy.account` already allows `personal` (balance ~$1803, per Compute section). If the team-account disappearance recurs in option A, re-dispatch on the personal account by editing the substitution policy's `prefer` from `team` to `personal` and re-running pod-provisioner. This is the cheapest test of "is this a team-account-specific issue."

**Option C — file a RunPod support ticket** with the four pod IDs across the four attempts, asking why `87xq2h88dmg5j5` (and retry-3's pod) reported `RUNNING` and then vanished from the account-scoped pod list. Worth doing in parallel with A or B regardless.

### What I am not changing

- The experiment plan itself is unchanged. The design, hypothesis, prediction, kill criteria, compute estimate, and runpod-spec in `planJson` are all still correct — this is infrastructure, not methodology.
- No critique loop. The R5 critique-loop notes already cover this exact path: "No critic was spawned because re-litigating the design would not advance recovery." That reasoning applies just as strongly here.
- No file edits, no pod dispatch, no compute spent.

### Evidence pointer

Orchestrator run: `f86281ce-da03-4f60-871a-a8723393c758`
Prior agent run (the failed pod-provisioner): `4b7f3f03-9bdd-42f6-b154-1354befe6a23`
Disappeared pod: `87xq2h88dmg5j5` (team account, A100×1 SECURE)

The operator should advance this experiment manually per the plan's R5 escalation rule before any further auto-recovery is allowed.

<<<DONE>>>
9:35:53 AMsdk_resultagent
success
9:35:53 AMawaiting_clarificationsagent
Claude produced clarifying questions instead of a full plan.

Discussion

Comments

No comments yet.

Enter posts · Shift-Enter for a newline · mention @claude to invoke the agent