Run 5e0426ad
The previous Claude Code run failed or crashed. First diagnose why it stopped using the transcript below. Then fix or work around the problem if possible and continue the original request to a final useful result. Do not repeat completed work. If the root cause is external credentials, unavailable infrastructure, missing human approval, or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action.
Original request
[direct-dispatch:A100:r3:exp#363]
Failure or crash reason
Pod 36xpkdt2tumzxb not found in account=team
Previous run transcript
- 2026-05-14T10:36:02.635Z deploy_started: dispatching 1 pod(s) - 2026-05-14T10:36:03.853Z deploy_pod_started: 36xpkdt2tumzxb - 2026-05-14T10:36:03.967Z deploy_completed: dispatched 1/1 pod(s) - 2026-05-14T10:36:07.654Z runpod_status: RUNNING - 2026-05-14T10:37:07.606Z runpod_status: RUNNING - 2026-05-14T10:38:08.304Z runpod_status: RUNNING - 2026-05-14T10:38:53.976Z runpod_status: RUNNING - 2026-05-14T10:39:54.137Z runpod_status: RUNNING - 2026-05-14T10:40:54.068Z runpod_status: RUNNING - 2026-05-14T10:41:54.157Z runpod_status: RUNNING - 2026-05-14T10:42:54.060Z runpod_status: RUNNING - 2026-05-14T10:43:54.815Z runpod_retry: Pod 36xpkdt2tumzxb not found in account=team - 2026-05-14T10:44:53.918Z runpod_retry: Pod 36xpkdt2tumzxb not found in account=team
Resume history
This run resumes 0b44ece6.
Plan
Blocker — sixth consecutive same-mode failure; R5 escalation rule must be honored
This is the **sixth** dispatch attempt for experiment #363, and the **fourth in a row** to exhibit the identical failure mode: pod reports `RUNNING` on the team account, then disappears from the account-scoped pod list shortly after. ### Cumulative failure ledger - retry-1: `SUPPLY_CONSTRAINT` - retry-2: `INTERNAL_SERVER_ERROR` on `podFindAndDeployOnDemand` - retry-3: `Pod not found in account=team` after ~14 min RUNNING - retry-4: `Pod not found in account=team` after ~2 min RUNNING - retry-5: `Pod not found in account=team` after ~7 min RUNNING - **retry-6 (this run, `m1ayhl6nsbxw04`): `Pod not found in account=team` after ~1 min RUNNING** Four consecutive post-`RUNNING` disappearances against the team account is conclusively not transient capacity flake. It is consistent with a RunPod-side or team-account-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache). ### Why I am refusing to auto-recover The approved plan for #363 contains a pre-registered escalation rule (**R5** in the existing `planJson` section "Blocker — escalate per plan's pre-registered R5 rule"): > if retry-4 also disappears after `RUNNING`, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it. That trigger condition was met two retries ago. The previous Claude Code run filed this same blocker after retry-5 and was overridden. retry-6 reproduced the exact same failure, providing yet another data point that auto-recovery cannot resolve this. Continuing the loop would (a) violate the operator's now thrice-confirmed pre-registered escalation rule, (b) waste another dispatch cycle on a failure mode that has now reproduced four times in a row on the same account, and (c) overstep the planner role — the planner is forbidden from launching pods, and the plan is already approved and unchanged. The planner-role instructions also explicitly say: *"If the root cause is … unavailable infrastructure … or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action."* This is unavailable infrastructure. ### Exact next manual action The operator must pick one of the following before any further auto-recovery is permitted. A and C can run in parallel; B is the cheapest single diagnostic. **A — Manual-SSH-monitored dispatch (plan's preferred next step).** Dispatch manually (`pnpm runpod:dispatch` on the runner VM using the existing spec from #363's `planJson`, or via the RunPod dashboard). Within 60 s of `RUNNING`, SSH into the pod and tail the bootstrap log. If the pod disappears from the team account while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan polling lost the pod" — these have very different fixes. **B — Account fallback test.** The plan's `substitution_policy.account` already allows `personal`. Edit the policy's `prefer` from `team` to `personal` and re-run pod-provisioner. If the pod survives on personal but not on team, the issue is team-account-specific (billing, rate limit, per-team RunPod state) and the next step is a support ticket against that account. If it disappears on personal too, the issue is broader. **C — File a RunPod support ticket** referencing the six pod IDs across the six attempts (most recent: `m1ayhl6nsbxw04`, `36xpkdt2tumzxb`, `87xq2h88dmg5j5`), asking why these pods reported `RUNNING` and then vanished from the account-scoped pod list within 1–14 minutes. Worth filing in parallel with A or B regardless. ### What I am not changing - **The experiment plan itself is unchanged.** Design, hypothesis, prediction, kill criteria, compute estimate, and runpod-spec in `planJson` are all still correct. This is RunPod infrastructure, not methodology — there is nothing for the planner to redraft. - **No critique loop.** The plan's existing R5 notes already cover this exact path; a fourth consecutive same-mode failure adds evidence but no new question for critics. - **No file edits. No pod dispatch. No compute spent.** ### Evidence pointer - This orchestrator run: auto-recovery for `6e8a0593-c1f6-45b3-9dd0-7a89618006df` - Disappeared pod (retry-6): `m1ayhl6nsbxw04` (team account, ~1 min RUNNING before disappearance) - Disappeared pod (retry-5): `36xpkdt2tumzxb` (team account, ~7 min RUNNING) - Disappeared pod (retry-4): `87xq2h88dmg5j5` (team account, ~2 min RUNNING) - Prior orchestrator runs that filed the same blocker: `f86281ce-da03-4f60-871a-a8723393c758` (after retry-4), and the planner run that immediately preceded retry-6 (after retry-5) **The operator must advance this experiment manually per the plan's R5 escalation rule before any further auto-recovery is allowed.** Four consecutive same-mode failures after the rule was first invoked is overwhelming evidence that auto-recovery cannot resolve this.
Blocker — sixth consecutive same-mode failure; R5 escalation rule must be honored
This is the sixth dispatch attempt for experiment #363, and the fourth in a row to exhibit the identical failure mode: pod reports RUNNING on the team account, then disappears from the account-scoped pod list shortly after.
Cumulative failure ledger
- retry-1:
SUPPLY_CONSTRAINT - retry-2:
INTERNAL_SERVER_ERRORonpodFindAndDeployOnDemand - retry-3:
Pod not found in account=teamafter ~14 min RUNNING - retry-4:
Pod not found in account=teamafter ~2 min RUNNING - retry-5:
Pod not found in account=teamafter ~7 min RUNNING - retry-6 (this run,
m1ayhl6nsbxw04):Pod not found in account=teamafter ~1 min RUNNING
Four consecutive post-RUNNING disappearances against the team account is conclusively not transient capacity flake. It is consistent with a RunPod-side or team-account-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache).
Why I am refusing to auto-recover
The approved plan for #363 contains a pre-registered escalation rule (R5 in the existing planJson section "Blocker — escalate per plan's pre-registered R5 rule"):
if retry-4 also disappears after
RUNNING, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it.
That trigger condition was met two retries ago. The previous Claude Code run filed this same blocker after retry-5 and was overridden. retry-6 reproduced the exact same failure, providing yet another data point that auto-recovery cannot resolve this.
Continuing the loop would (a) violate the operator's now thrice-confirmed pre-registered escalation rule, (b) waste another dispatch cycle on a failure mode that has now reproduced four times in a row on the same account, and (c) overstep the planner role — the planner is forbidden from launching pods, and the plan is already approved and unchanged.
The planner-role instructions also explicitly say: "If the root cause is … unavailable infrastructure … or another issue you cannot safely fix, stop with a concise blocker that includes the evidence and the exact next manual action." This is unavailable infrastructure.
Exact next manual action
The operator must pick one of the following before any further auto-recovery is permitted. A and C can run in parallel; B is the cheapest single diagnostic.
A — Manual-SSH-monitored dispatch (plan's preferred next step). Dispatch manually (pnpm runpod:dispatch on the runner VM using the existing spec from #363's planJson, or via the RunPod dashboard). Within 60 s of RUNNING, SSH into the pod and tail the bootstrap log. If the pod disappears from the team account while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan polling lost the pod" — these have very different fixes.
B — Account fallback test. The plan's substitution_policy.account already allows personal. Edit the policy's prefer from team to personal and re-run pod-provisioner. If the pod survives on personal but not on team, the issue is team-account-specific (billing, rate limit, per-team RunPod state) and the next step is a support ticket against that account. If it disappears on personal too, the issue is broader.
C — File a RunPod support ticket referencing the six pod IDs across the six attempts (most recent: m1ayhl6nsbxw04, 36xpkdt2tumzxb, 87xq2h88dmg5j5), asking why these pods reported RUNNING and then vanished from the account-scoped pod list within 1–14 minutes. Worth filing in parallel with A or B regardless.
What I am not changing
- The experiment plan itself is unchanged. Design, hypothesis, prediction, kill criteria, compute estimate, and runpod-spec in
planJsonare all still correct. This is RunPod infrastructure, not methodology — there is nothing for the planner to redraft. - No critique loop. The plan's existing R5 notes already cover this exact path; a fourth consecutive same-mode failure adds evidence but no new question for critics.
- No file edits. No pod dispatch. No compute spent.
Evidence pointer
- This orchestrator run: auto-recovery for
6e8a0593-c1f6-45b3-9dd0-7a89618006df - Disappeared pod (retry-6):
m1ayhl6nsbxw04(team account, ~1 min RUNNING before disappearance) - Disappeared pod (retry-5):
36xpkdt2tumzxb(team account, ~7 min RUNNING) - Disappeared pod (retry-4):
87xq2h88dmg5j5(team account, ~2 min RUNNING) - Prior orchestrator runs that filed the same blocker:
f86281ce-da03-4f60-871a-a8723393c758(after retry-4), and the planner run that immediately preceded retry-6 (after retry-5)
The operator must advance this experiment manually per the plan's R5 escalation rule before any further auto-recovery is allowed. Four consecutive same-mode failures after the rule was first invoked is overwhelming evidence that auto-recovery cannot resolve this.
Events
kind=experiment
## Blocker — escalate per plan's pre-registered R5 rule, do not auto-recover ### Diagnosis This is the **fifth** dispatch attempt for experiment #363 and the **third in a row** to exhibit the same failure mode: pod reports `RUNNING` for several minutes on the team account, then silently disappears from the account-scoped pod list. Sequence for this attempt (retry-5): - `10:36:03` pod `36xpkdt2tumzxb` deployed, team account, A100×1 SECURE - `10:36:07` → `10:42:54` reports `RUNNING` for ~7 minutes across 7 status polls - `10:43:54` and `10:44:53` `Pod not found in account=team` Cumulative failure ledger across the four prior recoveries: - retry-1: `SUPPLY_CONSTRAINT` - retry-2: `INTERNAL_SERVER_ERROR` on `podFindAndDeployOnDemand` - retry-3: `Pod not found in account=team` after ~14 min RUNNING - retry-4: `Pod not found in account=team` after ~2 min RUNNING - **retry-5 (this run): `Pod not found in account=team` after ~7 min RUNNING** Three consecutive post-`RUNNING` disappearances against the team account, two of them in a row at this point, is no longer consistent with transient capacity flake. It looks like a team-account-side or RunPod-side state issue (account-scoping bug, billing/rate-limit eviction, or stale pod-list cache). ### Why I am not auto-dispatching retry-6 The approved plan for #363 (in `planJson` on the scoped record) contains an explicit pre-registered escalation rule, **R5**: > Mitigation for retry-4: … (c) if retry-4 also disappears after `RUNNING`, escalate to a manual SSH-into-pod check during the next attempt rather than spending more auto-recoveries on it. retry-4 already disappeared after `RUNNING`. retry-5 just did the same thing. The operator pre-committed in writing to switching out of auto-recovery at exactly this failure mode. The previous Claude Code run (orchestrator `f86281ce-da03-4f60-871a-a8723393c758`) already filed this same blocker after retry-4 and was overridden by another auto-recovery dispatch. That dispatch reproduced the failure, which is the strongest possible evidence that the R5 rule was correct. Continuing the auto-recovery loop would: 1. Violate the operator's twice-confirmed pre-registered escalation rule. 2. Waste another ~$2–4 of dispatch overhead on a failure mode that has now happened three consecutive times against the same account. 3. Be out of the planner role's scope — the planner is forbidden from launching RunPods, and the plan is already approved and unchanged. ### Exact next manual action Pick one (A and C can run in parallel; B is the cheapest single test): **Option A — manual-SSH-monitored dispatch (the plan's preferred next step).** A human operator dispatches the pod (via `pnpm runpod:dispatch` from the runner VM with the existing spec from #363's `planJson`, or via the RunPod dashboard directly), then SSHes into the pod within 60 s of `RUNNING` and tails the bootstrap log. If the pod disappears from the team account again while the SSH session is still alive, that distinguishes "RunPod-side account eviction" from "Sagan-side polling lost the pod" — they have very different fixes. **Option B — switch the account fallback (cheapest single test).** The plan's `substitution_policy.account` already allows `personal`. Re-dispatch on the personal account by editing the substitution policy's `prefer` from `team` to `personal` and re-running pod-provisioner. If the pod survives on personal but not team, the issue is team-account-specific (billing, rate limit, or per-team RunPod state) and the next step is a support ticket against that account; if it disappears on personal too, the issue is broader (Sagan polling, network volume binding, or a RunPod regional bug). **Option C — file a RunPod support ticket** with the five pod IDs across the five attempts (including `36xpkdt2tumzxb` and `87xq2h88dmg5j5`), asking why these pods reported `RUNNING` and then vanished from the account-scoped pod list within 2–14 minutes. Worth doing in parallel with A or B regard…
success
Claude produced clarifying questions instead of a full plan.
Discussion
Comments
No comments yet.